Struct sgx_tstd::num::Wrapping1.0.0[][src]

#[repr(transparent)]
pub struct Wrapping<T>(pub T);

Provides intentionally-wrapped arithmetic on T.

Operations like + on u32 values is intended to never overflow, and in some debug configurations overflow is detected and results in a panic. While most arithmetic falls into this category, some code explicitly expects and relies upon modular arithmetic (e.g., hashing).

Wrapping arithmetic can be achieved either through methods like wrapping_add, or through the Wrapping<T> type, which says that all standard arithmetic operations on the underlying value are intended to have wrapping semantics.

Examples

use std::num::Wrapping;

let zero = Wrapping(0u32);
let one = Wrapping(1u32);

assert_eq!(std::u32::MAX, (zero - one).0);

Methods

impl Wrapping<usize>
[src]

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<usize>>::min_value(), Wrapping(usize::min_value()));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<usize>>::max_value(), Wrapping(usize::max_value()));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100usize);

assert_eq!(n.count_ones(), 3);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0usize).count_zeros(), 0);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000usize);

assert_eq!(n.trailing_zeros(), 3);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn't the same operation as >>!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn't the same operation as <<!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

🔬 This is a nightly-only experimental API. (reverse_bits)

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

#![feature(reverse_bits)]
use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts an integer from big endian to the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ausize);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<usize>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<usize>>::from_be(n), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts an integer from little endian to the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ausize);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<usize>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<usize>>::from_le(n), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts self to big endian from the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ausize);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts self to little endian from the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ausize);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3usize).pow(4), Wrapping(81));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));

impl Wrapping<u8>
[src]

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u8>>::min_value(), Wrapping(u8::min_value()));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u8>>::max_value(), Wrapping(u8::max_value()));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100u8);

assert_eq!(n.count_ones(), 3);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0u8).count_zeros(), 0);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000u8);

assert_eq!(n.trailing_zeros(), 3);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn't the same operation as >>!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn't the same operation as <<!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

🔬 This is a nightly-only experimental API. (reverse_bits)

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

#![feature(reverse_bits)]
use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts an integer from big endian to the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au8);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<u8>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<u8>>::from_be(n), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts an integer from little endian to the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au8);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<u8>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<u8>>::from_le(n), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts self to big endian from the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au8);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts self to little endian from the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au8);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3u8).pow(4), Wrapping(81));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));

impl Wrapping<u16>
[src]

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u16>>::min_value(), Wrapping(u16::min_value()));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u16>>::max_value(), Wrapping(u16::max_value()));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100u16);

assert_eq!(n.count_ones(), 3);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0u16).count_zeros(), 0);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000u16);

assert_eq!(n.trailing_zeros(), 3);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn't the same operation as >>!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn't the same operation as <<!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

🔬 This is a nightly-only experimental API. (reverse_bits)

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

#![feature(reverse_bits)]
use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts an integer from big endian to the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au16);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<u16>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<u16>>::from_be(n), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts an integer from little endian to the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au16);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<u16>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<u16>>::from_le(n), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts self to big endian from the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au16);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts self to little endian from the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au16);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3u16).pow(4), Wrapping(81));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));

impl Wrapping<u32>
[src]

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u32>>::min_value(), Wrapping(u32::min_value()));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u32>>::max_value(), Wrapping(u32::max_value()));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100u32);

assert_eq!(n.count_ones(), 3);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0u32).count_zeros(), 0);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000u32);

assert_eq!(n.trailing_zeros(), 3);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn't the same operation as >>!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn't the same operation as <<!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

🔬 This is a nightly-only experimental API. (reverse_bits)

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

#![feature(reverse_bits)]
use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts an integer from big endian to the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au32);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<u32>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<u32>>::from_be(n), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts an integer from little endian to the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au32);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<u32>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<u32>>::from_le(n), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts self to big endian from the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au32);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts self to little endian from the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au32);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3u32).pow(4), Wrapping(81));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));

impl Wrapping<u64>
[src]

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u64>>::min_value(), Wrapping(u64::min_value()));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u64>>::max_value(), Wrapping(u64::max_value()));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100u64);

assert_eq!(n.count_ones(), 3);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0u64).count_zeros(), 0);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000u64);

assert_eq!(n.trailing_zeros(), 3);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn't the same operation as >>!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn't the same operation as <<!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

🔬 This is a nightly-only experimental API. (reverse_bits)

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

#![feature(reverse_bits)]
use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts an integer from big endian to the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au64);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<u64>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<u64>>::from_be(n), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts an integer from little endian to the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au64);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<u64>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<u64>>::from_le(n), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts self to big endian from the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au64);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts self to little endian from the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au64);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3u64).pow(4), Wrapping(81));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));

impl Wrapping<u128>
[src]

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u128>>::min_value(), Wrapping(u128::min_value()));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<u128>>::max_value(), Wrapping(u128::max_value()));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100u128);

assert_eq!(n.count_ones(), 3);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0u128).count_zeros(), 0);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000u128);

assert_eq!(n.trailing_zeros(), 3);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn't the same operation as >>!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn't the same operation as <<!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

🔬 This is a nightly-only experimental API. (reverse_bits)

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

#![feature(reverse_bits)]
use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts an integer from big endian to the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au128);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<u128>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<u128>>::from_be(n), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts an integer from little endian to the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au128);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<u128>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<u128>>::from_le(n), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts self to big endian from the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au128);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts self to little endian from the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Au128);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3u128).pow(4), Wrapping(81));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));

impl Wrapping<isize>
[src]

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<isize>>::min_value(), Wrapping(isize::min_value()));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<isize>>::max_value(), Wrapping(isize::max_value()));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100isize);

assert_eq!(n.count_ones(), 3);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0isize).count_zeros(), 0);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000isize);

assert_eq!(n.trailing_zeros(), 3);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn't the same operation as >>!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn't the same operation as <<!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

🔬 This is a nightly-only experimental API. (reverse_bits)

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

#![feature(reverse_bits)]
use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts an integer from big endian to the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Aisize);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<isize>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<isize>>::from_be(n), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts an integer from little endian to the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Aisize);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<isize>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<isize>>::from_le(n), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts self to big endian from the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Aisize);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts self to little endian from the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Aisize);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3isize).pow(4), Wrapping(81));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));

impl Wrapping<i8>
[src]

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i8>>::min_value(), Wrapping(i8::min_value()));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i8>>::max_value(), Wrapping(i8::max_value()));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100i8);

assert_eq!(n.count_ones(), 3);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0i8).count_zeros(), 0);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000i8);

assert_eq!(n.trailing_zeros(), 3);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn't the same operation as >>!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn't the same operation as <<!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

🔬 This is a nightly-only experimental API. (reverse_bits)

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

#![feature(reverse_bits)]
use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts an integer from big endian to the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai8);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<i8>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<i8>>::from_be(n), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts an integer from little endian to the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai8);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<i8>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<i8>>::from_le(n), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts self to big endian from the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai8);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts self to little endian from the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai8);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(4), Wrapping(81));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));

impl Wrapping<i16>
[src]

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i16>>::min_value(), Wrapping(i16::min_value()));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i16>>::max_value(), Wrapping(i16::max_value()));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100i16);

assert_eq!(n.count_ones(), 3);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0i16).count_zeros(), 0);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000i16);

assert_eq!(n.trailing_zeros(), 3);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn't the same operation as >>!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn't the same operation as <<!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

🔬 This is a nightly-only experimental API. (reverse_bits)

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

#![feature(reverse_bits)]
use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts an integer from big endian to the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai16);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<i16>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<i16>>::from_be(n), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts an integer from little endian to the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai16);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<i16>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<i16>>::from_le(n), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts self to big endian from the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai16);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts self to little endian from the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai16);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i16).pow(4), Wrapping(81));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));

impl Wrapping<i32>
[src]

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i32>>::min_value(), Wrapping(i32::min_value()));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i32>>::max_value(), Wrapping(i32::max_value()));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100i32);

assert_eq!(n.count_ones(), 3);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0i32).count_zeros(), 0);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000i32);

assert_eq!(n.trailing_zeros(), 3);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn't the same operation as >>!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn't the same operation as <<!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

🔬 This is a nightly-only experimental API. (reverse_bits)

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

#![feature(reverse_bits)]
use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts an integer from big endian to the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai32);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<i32>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<i32>>::from_be(n), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts an integer from little endian to the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai32);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<i32>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<i32>>::from_le(n), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts self to big endian from the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai32);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts self to little endian from the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai32);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i32).pow(4), Wrapping(81));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));

impl Wrapping<i64>
[src]

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i64>>::min_value(), Wrapping(i64::min_value()));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i64>>::max_value(), Wrapping(i64::max_value()));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100i64);

assert_eq!(n.count_ones(), 3);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0i64).count_zeros(), 0);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000i64);

assert_eq!(n.trailing_zeros(), 3);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn't the same operation as >>!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn't the same operation as <<!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

🔬 This is a nightly-only experimental API. (reverse_bits)

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

#![feature(reverse_bits)]
use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts an integer from big endian to the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai64);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<i64>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<i64>>::from_be(n), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts an integer from little endian to the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai64);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<i64>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<i64>>::from_le(n), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts self to big endian from the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai64);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts self to little endian from the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai64);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i64).pow(4), Wrapping(81));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));

impl Wrapping<i128>
[src]

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i128>>::min_value(), Wrapping(i128::min_value()));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(<Wrapping<i128>>::max_value(), Wrapping(i128::max_value()));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b01001100i128);

assert_eq!(n.count_ones(), 3);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(!0i128).count_zeros(), 0);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0b0101000i128);

assert_eq!(n.trailing_zeros(), 3);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn't the same operation as >>!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn't the same operation as <<!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

🔬 This is a nightly-only experimental API. (reverse_bits)

Reverses the bit pattern of the integer.

Examples

Please note that this example is shared between integer types. Which explains why i16 is used here.

Basic usage:

#![feature(reverse_bits)]
use std::num::Wrapping;

let n = Wrapping(0b0000000_01010101i16);
assert_eq!(n, Wrapping(85));

let m = n.reverse_bits();

assert_eq!(m.0 as u16, 0b10101010_00000000);
assert_eq!(m, Wrapping(-22016));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts an integer from big endian to the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai128);

if cfg!(target_endian = "big") {
    assert_eq!(<Wrapping<i128>>::from_be(n), n)
} else {
    assert_eq!(<Wrapping<i128>>::from_be(n), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts an integer from little endian to the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai128);

if cfg!(target_endian = "little") {
    assert_eq!(<Wrapping<i128>>::from_le(n), n)
} else {
    assert_eq!(<Wrapping<i128>>::from_le(n), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts self to big endian from the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai128);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Converts self to little endian from the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(0x1Ai128);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i128).pow(4), Wrapping(81));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(3i8).pow(5), Wrapping(-13));
assert_eq!(Wrapping(3i8).pow(6), Wrapping(-39));

impl Wrapping<isize>
[src]

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(isize::max_value()) >> 2;

assert_eq!(n.leading_zeros(), 3);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Computes the absolute value of self, wrapping around at the boundary of the type.

The only case where such wrapping can occur is when one takes the absolute value of the negative minimal value for the type this is a positive value that is too large to represent in the type. In such a case, this function returns MIN itself.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(100isize).abs(), Wrapping(100));
assert_eq!(Wrapping(-100isize).abs(), Wrapping(100));
assert_eq!(Wrapping(isize::min_value()).abs(), Wrapping(isize::min_value()));
assert_eq!(Wrapping(-128i8).abs().0 as u8, 128u8);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns a number representing sign of self.

  • 0 if the number is zero
  • 1 if the number is positive
  • -1 if the number is negative

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(10isize).signum(), Wrapping(1));
assert_eq!(Wrapping(0isize).signum(), Wrapping(0));
assert_eq!(Wrapping(-10isize).signum(), Wrapping(-1));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns true if self is positive and false if the number is zero or negative.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(10isize).is_positive());
assert!(!Wrapping(-10isize).is_positive());

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns true if self is negative and false if the number is zero or positive.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(-10isize).is_negative());
assert!(!Wrapping(10isize).is_negative());

impl Wrapping<i8>
[src]

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(i8::max_value()) >> 2;

assert_eq!(n.leading_zeros(), 3);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Computes the absolute value of self, wrapping around at the boundary of the type.

The only case where such wrapping can occur is when one takes the absolute value of the negative minimal value for the type this is a positive value that is too large to represent in the type. In such a case, this function returns MIN itself.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(100i8).abs(), Wrapping(100));
assert_eq!(Wrapping(-100i8).abs(), Wrapping(100));
assert_eq!(Wrapping(i8::min_value()).abs(), Wrapping(i8::min_value()));
assert_eq!(Wrapping(-128i8).abs().0 as u8, 128u8);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns a number representing sign of self.

  • 0 if the number is zero
  • 1 if the number is positive
  • -1 if the number is negative

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(10i8).signum(), Wrapping(1));
assert_eq!(Wrapping(0i8).signum(), Wrapping(0));
assert_eq!(Wrapping(-10i8).signum(), Wrapping(-1));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns true if self is positive and false if the number is zero or negative.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(10i8).is_positive());
assert!(!Wrapping(-10i8).is_positive());

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns true if self is negative and false if the number is zero or positive.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(-10i8).is_negative());
assert!(!Wrapping(10i8).is_negative());

impl Wrapping<i16>
[src]

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(i16::max_value()) >> 2;

assert_eq!(n.leading_zeros(), 3);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Computes the absolute value of self, wrapping around at the boundary of the type.

The only case where such wrapping can occur is when one takes the absolute value of the negative minimal value for the type this is a positive value that is too large to represent in the type. In such a case, this function returns MIN itself.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(100i16).abs(), Wrapping(100));
assert_eq!(Wrapping(-100i16).abs(), Wrapping(100));
assert_eq!(Wrapping(i16::min_value()).abs(), Wrapping(i16::min_value()));
assert_eq!(Wrapping(-128i8).abs().0 as u8, 128u8);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns a number representing sign of self.

  • 0 if the number is zero
  • 1 if the number is positive
  • -1 if the number is negative

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(10i16).signum(), Wrapping(1));
assert_eq!(Wrapping(0i16).signum(), Wrapping(0));
assert_eq!(Wrapping(-10i16).signum(), Wrapping(-1));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns true if self is positive and false if the number is zero or negative.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(10i16).is_positive());
assert!(!Wrapping(-10i16).is_positive());

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns true if self is negative and false if the number is zero or positive.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(-10i16).is_negative());
assert!(!Wrapping(10i16).is_negative());

impl Wrapping<i32>
[src]

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(i32::max_value()) >> 2;

assert_eq!(n.leading_zeros(), 3);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Computes the absolute value of self, wrapping around at the boundary of the type.

The only case where such wrapping can occur is when one takes the absolute value of the negative minimal value for the type this is a positive value that is too large to represent in the type. In such a case, this function returns MIN itself.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(100i32).abs(), Wrapping(100));
assert_eq!(Wrapping(-100i32).abs(), Wrapping(100));
assert_eq!(Wrapping(i32::min_value()).abs(), Wrapping(i32::min_value()));
assert_eq!(Wrapping(-128i8).abs().0 as u8, 128u8);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns a number representing sign of self.

  • 0 if the number is zero
  • 1 if the number is positive
  • -1 if the number is negative

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(10i32).signum(), Wrapping(1));
assert_eq!(Wrapping(0i32).signum(), Wrapping(0));
assert_eq!(Wrapping(-10i32).signum(), Wrapping(-1));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns true if self is positive and false if the number is zero or negative.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(10i32).is_positive());
assert!(!Wrapping(-10i32).is_positive());

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns true if self is negative and false if the number is zero or positive.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(-10i32).is_negative());
assert!(!Wrapping(10i32).is_negative());

impl Wrapping<i64>
[src]

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(i64::max_value()) >> 2;

assert_eq!(n.leading_zeros(), 3);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Computes the absolute value of self, wrapping around at the boundary of the type.

The only case where such wrapping can occur is when one takes the absolute value of the negative minimal value for the type this is a positive value that is too large to represent in the type. In such a case, this function returns MIN itself.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(100i64).abs(), Wrapping(100));
assert_eq!(Wrapping(-100i64).abs(), Wrapping(100));
assert_eq!(Wrapping(i64::min_value()).abs(), Wrapping(i64::min_value()));
assert_eq!(Wrapping(-128i8).abs().0 as u8, 128u8);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns a number representing sign of self.

  • 0 if the number is zero
  • 1 if the number is positive
  • -1 if the number is negative

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(10i64).signum(), Wrapping(1));
assert_eq!(Wrapping(0i64).signum(), Wrapping(0));
assert_eq!(Wrapping(-10i64).signum(), Wrapping(-1));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns true if self is positive and false if the number is zero or negative.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(10i64).is_positive());
assert!(!Wrapping(-10i64).is_positive());

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns true if self is negative and false if the number is zero or positive.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(-10i64).is_negative());
assert!(!Wrapping(10i64).is_negative());

impl Wrapping<i128>
[src]

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(i128::max_value()) >> 2;

assert_eq!(n.leading_zeros(), 3);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Computes the absolute value of self, wrapping around at the boundary of the type.

The only case where such wrapping can occur is when one takes the absolute value of the negative minimal value for the type this is a positive value that is too large to represent in the type. In such a case, this function returns MIN itself.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(100i128).abs(), Wrapping(100));
assert_eq!(Wrapping(-100i128).abs(), Wrapping(100));
assert_eq!(Wrapping(i128::min_value()).abs(), Wrapping(i128::min_value()));
assert_eq!(Wrapping(-128i8).abs().0 as u8, 128u8);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns a number representing sign of self.

  • 0 if the number is zero
  • 1 if the number is positive
  • -1 if the number is negative

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert_eq!(Wrapping(10i128).signum(), Wrapping(1));
assert_eq!(Wrapping(0i128).signum(), Wrapping(0));
assert_eq!(Wrapping(-10i128).signum(), Wrapping(-1));

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns true if self is positive and false if the number is zero or negative.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(10i128).is_positive());
assert!(!Wrapping(-10i128).is_positive());

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns true if self is negative and false if the number is zero or positive.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(-10i128).is_negative());
assert!(!Wrapping(10i128).is_negative());

impl Wrapping<usize>
[src]

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(usize::max_value()) >> 2;

assert_eq!(n.leading_zeros(), 2);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns true if and only if self == 2^k for some k.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(16usize).is_power_of_two());
assert!(!Wrapping(10usize).is_power_of_two());

🔬 This is a nightly-only experimental API. (wrapping_next_power_of_two)

needs decision on wrapping behaviour

Returns the smallest power of two greater than or equal to self.

When return value overflows (i.e. self > (1 << (N-1)) for type uN), overflows to 2^N = 0.

Examples

Basic usage:

#![feature(wrapping_next_power_of_two)]
use std::num::Wrapping;

assert_eq!(Wrapping(2usize).next_power_of_two(), Wrapping(2));
assert_eq!(Wrapping(3usize).next_power_of_two(), Wrapping(4));
assert_eq!(Wrapping(200_u8).next_power_of_two(), Wrapping(0));

impl Wrapping<u8>
[src]

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(u8::max_value()) >> 2;

assert_eq!(n.leading_zeros(), 2);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns true if and only if self == 2^k for some k.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(16u8).is_power_of_two());
assert!(!Wrapping(10u8).is_power_of_two());

🔬 This is a nightly-only experimental API. (wrapping_next_power_of_two)

needs decision on wrapping behaviour

Returns the smallest power of two greater than or equal to self.

When return value overflows (i.e. self > (1 << (N-1)) for type uN), overflows to 2^N = 0.

Examples

Basic usage:

#![feature(wrapping_next_power_of_two)]
use std::num::Wrapping;

assert_eq!(Wrapping(2u8).next_power_of_two(), Wrapping(2));
assert_eq!(Wrapping(3u8).next_power_of_two(), Wrapping(4));
assert_eq!(Wrapping(200_u8).next_power_of_two(), Wrapping(0));

impl Wrapping<u16>
[src]

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(u16::max_value()) >> 2;

assert_eq!(n.leading_zeros(), 2);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns true if and only if self == 2^k for some k.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(16u16).is_power_of_two());
assert!(!Wrapping(10u16).is_power_of_two());

🔬 This is a nightly-only experimental API. (wrapping_next_power_of_two)

needs decision on wrapping behaviour

Returns the smallest power of two greater than or equal to self.

When return value overflows (i.e. self > (1 << (N-1)) for type uN), overflows to 2^N = 0.

Examples

Basic usage:

#![feature(wrapping_next_power_of_two)]
use std::num::Wrapping;

assert_eq!(Wrapping(2u16).next_power_of_two(), Wrapping(2));
assert_eq!(Wrapping(3u16).next_power_of_two(), Wrapping(4));
assert_eq!(Wrapping(200_u8).next_power_of_two(), Wrapping(0));

impl Wrapping<u32>
[src]

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(u32::max_value()) >> 2;

assert_eq!(n.leading_zeros(), 2);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns true if and only if self == 2^k for some k.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(16u32).is_power_of_two());
assert!(!Wrapping(10u32).is_power_of_two());

🔬 This is a nightly-only experimental API. (wrapping_next_power_of_two)

needs decision on wrapping behaviour

Returns the smallest power of two greater than or equal to self.

When return value overflows (i.e. self > (1 << (N-1)) for type uN), overflows to 2^N = 0.

Examples

Basic usage:

#![feature(wrapping_next_power_of_two)]
use std::num::Wrapping;

assert_eq!(Wrapping(2u32).next_power_of_two(), Wrapping(2));
assert_eq!(Wrapping(3u32).next_power_of_two(), Wrapping(4));
assert_eq!(Wrapping(200_u8).next_power_of_two(), Wrapping(0));

impl Wrapping<u64>
[src]

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(u64::max_value()) >> 2;

assert_eq!(n.leading_zeros(), 2);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns true if and only if self == 2^k for some k.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(16u64).is_power_of_two());
assert!(!Wrapping(10u64).is_power_of_two());

🔬 This is a nightly-only experimental API. (wrapping_next_power_of_two)

needs decision on wrapping behaviour

Returns the smallest power of two greater than or equal to self.

When return value overflows (i.e. self > (1 << (N-1)) for type uN), overflows to 2^N = 0.

Examples

Basic usage:

#![feature(wrapping_next_power_of_two)]
use std::num::Wrapping;

assert_eq!(Wrapping(2u64).next_power_of_two(), Wrapping(2));
assert_eq!(Wrapping(3u64).next_power_of_two(), Wrapping(4));
assert_eq!(Wrapping(200_u8).next_power_of_two(), Wrapping(0));

impl Wrapping<u128>
[src]

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n = Wrapping(u128::max_value()) >> 2;

assert_eq!(n.leading_zeros(), 2);

🔬 This is a nightly-only experimental API. (wrapping_int_impl)

Returns true if and only if self == 2^k for some k.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

assert!(Wrapping(16u128).is_power_of_two());
assert!(!Wrapping(10u128).is_power_of_two());

🔬 This is a nightly-only experimental API. (wrapping_next_power_of_two)

needs decision on wrapping behaviour

Returns the smallest power of two greater than or equal to self.

When return value overflows (i.e. self > (1 << (N-1)) for type uN), overflows to 2^N = 0.

Examples

Basic usage:

#![feature(wrapping_next_power_of_two)]
use std::num::Wrapping;

assert_eq!(Wrapping(2u128).next_power_of_two(), Wrapping(2));
assert_eq!(Wrapping(3u128).next_power_of_two(), Wrapping(4));
assert_eq!(Wrapping(200_u8).next_power_of_two(), Wrapping(0));

Trait Implementations

impl RemAssign<Wrapping<u8>> for Wrapping<u8>
1.8.0
[src]

Performs the %= operation.

impl RemAssign<Wrapping<i8>> for Wrapping<i8>
1.8.0
[src]

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<u8>> for Wrapping<u8>
1.22.0
[src]

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<i128>> for Wrapping<i128>
1.22.0
[src]

Performs the %= operation.

impl RemAssign<Wrapping<i128>> for Wrapping<i128>
1.8.0
[src]

Performs the %= operation.

impl RemAssign<Wrapping<usize>> for Wrapping<usize>
1.8.0
[src]

Performs the %= operation.

impl RemAssign<Wrapping<u128>> for Wrapping<u128>
1.8.0
[src]

Performs the %= operation.

impl RemAssign<Wrapping<i64>> for Wrapping<i64>
1.8.0
[src]

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<isize>> for Wrapping<isize>
1.22.0
[src]

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<i8>> for Wrapping<i8>
1.22.0
[src]

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<i16>> for Wrapping<i16>
1.22.0
[src]

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<i32>> for Wrapping<i32>
1.22.0
[src]

Performs the %= operation.

impl RemAssign<Wrapping<u16>> for Wrapping<u16>
1.8.0
[src]

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<u16>> for Wrapping<u16>
1.22.0
[src]

Performs the %= operation.

impl RemAssign<Wrapping<isize>> for Wrapping<isize>
1.8.0
[src]

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<i64>> for Wrapping<i64>
1.22.0
[src]

Performs the %= operation.

impl RemAssign<Wrapping<u32>> for Wrapping<u32>
1.8.0
[src]

Performs the %= operation.

impl RemAssign<Wrapping<i16>> for Wrapping<i16>
1.8.0
[src]

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<u64>> for Wrapping<u64>
1.22.0
[src]

Performs the %= operation.

impl RemAssign<Wrapping<u64>> for Wrapping<u64>
1.8.0
[src]

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<u128>> for Wrapping<u128>
1.22.0
[src]

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<u32>> for Wrapping<u32>
1.22.0
[src]

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<usize>> for Wrapping<usize>
1.22.0
[src]

Performs the %= operation.

impl RemAssign<Wrapping<i32>> for Wrapping<i32>
1.8.0
[src]

Performs the %= operation.

impl MulAssign<Wrapping<i32>> for Wrapping<i32>
1.8.0
[src]

Performs the *= operation.

impl MulAssign<Wrapping<i64>> for Wrapping<i64>
1.8.0
[src]

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<usize>> for Wrapping<usize>
1.22.0
[src]

Performs the *= operation.

impl MulAssign<Wrapping<u128>> for Wrapping<u128>
1.8.0
[src]

Performs the *= operation.

impl MulAssign<Wrapping<isize>> for Wrapping<isize>
1.8.0
[src]

Performs the *= operation.

impl MulAssign<Wrapping<u64>> for Wrapping<u64>
1.8.0
[src]

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<i32>> for Wrapping<i32>
1.22.0
[src]

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<u8>> for Wrapping<u8>
1.22.0
[src]

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<i64>> for Wrapping<i64>
1.22.0
[src]

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<i128>> for Wrapping<i128>
1.22.0
[src]

Performs the *= operation.

impl MulAssign<Wrapping<u16>> for Wrapping<u16>
1.8.0
[src]

Performs the *= operation.

impl MulAssign<Wrapping<i8>> for Wrapping<i8>
1.8.0
[src]

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<i8>> for Wrapping<i8>
1.22.0
[src]

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<u64>> for Wrapping<u64>
1.22.0
[src]

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<i16>> for Wrapping<i16>
1.22.0
[src]

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<isize>> for Wrapping<isize>
1.22.0
[src]

Performs the *= operation.

impl MulAssign<Wrapping<i16>> for Wrapping<i16>
1.8.0
[src]

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<u128>> for Wrapping<u128>
1.22.0
[src]

Performs the *= operation.

impl MulAssign<Wrapping<usize>> for Wrapping<usize>
1.8.0
[src]

Performs the *= operation.

impl MulAssign<Wrapping<u32>> for Wrapping<u32>
1.8.0
[src]

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<u32>> for Wrapping<u32>
1.22.0
[src]

Performs the *= operation.

impl MulAssign<Wrapping<u8>> for Wrapping<u8>
1.8.0
[src]

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<u16>> for Wrapping<u16>
1.22.0
[src]

Performs the *= operation.

impl MulAssign<Wrapping<i128>> for Wrapping<i128>
1.8.0
[src]

Performs the *= operation.

impl AddAssign<Wrapping<u64>> for Wrapping<u64>
1.8.0
[src]

Performs the += operation.

impl AddAssign<Wrapping<u128>> for Wrapping<u128>
1.8.0
[src]

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<u16>> for Wrapping<u16>
1.22.0
[src]

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<i128>> for Wrapping<i128>
1.22.0
[src]

Performs the += operation.

impl AddAssign<Wrapping<i16>> for Wrapping<i16>
1.8.0
[src]

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<i16>> for Wrapping<i16>
1.22.0
[src]

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<u8>> for Wrapping<u8>
1.22.0
[src]

Performs the += operation.

impl AddAssign<Wrapping<usize>> for Wrapping<usize>
1.8.0
[src]

Performs the += operation.

impl AddAssign<Wrapping<u32>> for Wrapping<u32>
1.8.0
[src]

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<isize>> for Wrapping<isize>
1.22.0
[src]

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<i64>> for Wrapping<i64>
1.22.0
[src]

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<i8>> for Wrapping<i8>
1.22.0
[src]

Performs the += operation.

impl AddAssign<Wrapping<isize>> for Wrapping<isize>
1.8.0
[src]

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<usize>> for Wrapping<usize>
1.22.0
[src]

Performs the += operation.

impl AddAssign<Wrapping<i128>> for Wrapping<i128>
1.8.0
[src]

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<u64>> for Wrapping<u64>
1.22.0
[src]

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<u128>> for Wrapping<u128>
1.22.0
[src]

Performs the += operation.

impl AddAssign<Wrapping<u8>> for Wrapping<u8>
1.8.0
[src]

Performs the += operation.

impl AddAssign<Wrapping<i32>> for Wrapping<i32>
1.8.0
[src]

Performs the += operation.

impl AddAssign<Wrapping<i64>> for Wrapping<i64>
1.8.0
[src]

Performs the += operation.

impl AddAssign<Wrapping<i8>> for Wrapping<i8>
1.8.0
[src]

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<u32>> for Wrapping<u32>
1.22.0
[src]

Performs the += operation.

impl AddAssign<Wrapping<u16>> for Wrapping<u16>
1.8.0
[src]

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<i32>> for Wrapping<i32>
1.22.0
[src]

Performs the += operation.

impl Neg for Wrapping<i32>
1.10.0
[src]

The resulting type after applying the - operator.

Performs the unary - operation.

impl Neg for Wrapping<u128>
1.10.0
[src]

The resulting type after applying the - operator.

Performs the unary - operation.

impl Neg for Wrapping<isize>
1.10.0
[src]

The resulting type after applying the - operator.

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<i128>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the unary - operation.

impl Neg for Wrapping<i16>
1.10.0
[src]

The resulting type after applying the - operator.

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<isize>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<u32>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the unary - operation.

impl Neg for Wrapping<usize>
1.10.0
[src]

The resulting type after applying the - operator.

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<i16>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<u16>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the unary - operation.

impl Neg for Wrapping<i128>
1.10.0
[src]

The resulting type after applying the - operator.

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<i64>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the unary - operation.

impl Neg for Wrapping<u16>
1.10.0
[src]

The resulting type after applying the - operator.

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<u128>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the unary - operation.

impl Neg for Wrapping<u32>
1.10.0
[src]

The resulting type after applying the - operator.

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<u64>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<usize>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<u8>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the unary - operation.

impl Neg for Wrapping<u64>
1.10.0
[src]

The resulting type after applying the - operator.

Performs the unary - operation.

impl Neg for Wrapping<i8>
1.10.0
[src]

The resulting type after applying the - operator.

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<i8>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the unary - operation.

impl Neg for Wrapping<i64>
1.10.0
[src]

The resulting type after applying the - operator.

Performs the unary - operation.

impl Neg for Wrapping<u8>
1.10.0
[src]

The resulting type after applying the - operator.

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<i32>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the unary - operation.

impl<'a> ShrAssign<&'a usize> for Wrapping<u128>
1.22.0
[src]

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<i128>
1.8.0
[src]

Performs the >>= operation.

impl<'a> ShrAssign<&'a usize> for Wrapping<u8>
1.22.0
[src]

Performs the >>= operation.

impl<'a> ShrAssign<&'a usize> for Wrapping<usize>
1.22.0
[src]

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<u8>
1.8.0
[src]

Performs the >>= operation.

impl<'a> ShrAssign<&'a usize> for Wrapping<u64>
1.22.0
[src]

Performs the >>= operation.

impl<'a> ShrAssign<&'a usize> for Wrapping<i128>
1.22.0
[src]

Performs the >>= operation.

impl<'a> ShrAssign<&'a usize> for Wrapping<i32>
1.22.0
[src]

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<u32>
1.8.0
[src]

Performs the >>= operation.

impl<'a> ShrAssign<&'a usize> for Wrapping<u32>
1.22.0
[src]

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<u16>
1.8.0
[src]

Performs the >>= operation.

impl<'a> ShrAssign<&'a usize> for Wrapping<i16>
1.22.0
[src]

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<u64>
1.8.0
[src]

Performs the >>= operation.

impl<'a> ShrAssign<&'a usize> for Wrapping<u16>
1.22.0
[src]

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<i32>
1.8.0
[src]

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<i8>
1.8.0
[src]

Performs the >>= operation.

impl<'a> ShrAssign<&'a usize> for Wrapping<i64>
1.22.0
[src]

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<i64>
1.8.0
[src]

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<isize>
1.8.0
[src]

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<u128>
1.8.0
[src]

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<i16>
1.8.0
[src]

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<usize>
1.8.0
[src]

Performs the >>= operation.

impl<'a> ShrAssign<&'a usize> for Wrapping<i8>
1.22.0
[src]

Performs the >>= operation.

impl<'a> ShrAssign<&'a usize> for Wrapping<isize>
1.22.0
[src]

Performs the >>= operation.

impl<T> UpperHex for Wrapping<T> where
    T: UpperHex
1.11.0
[src]

Formats the value using the given formatter.

impl<T> Clone for Wrapping<T> where
    T: Clone
[src]

Returns a copy of the value. Read more

Performs copy-assignment from source. Read more

impl<T> PartialOrd<Wrapping<T>> for Wrapping<T> where
    T: PartialOrd<T>, 
[src]

This method returns an ordering between self and other values if one exists. Read more

This method tests less than (for self and other) and is used by the < operator. Read more

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

This method tests greater than (for self and other) and is used by the > operator. Read more

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl<T> Octal for Wrapping<T> where
    T: Octal
1.11.0
[src]

Formats the value using the given formatter.

impl Sub<Wrapping<i16>> for Wrapping<i16>
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<u8>> for &'b Wrapping<u8>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a> Sub<&'a Wrapping<u8>> for Wrapping<u8>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a> Sub<&'a Wrapping<i64>> for Wrapping<i64>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl Sub<Wrapping<u16>> for Wrapping<u16>
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a> Sub<&'a Wrapping<u16>> for Wrapping<u16>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<u128>> for &'b Wrapping<u128>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl Sub<Wrapping<i128>> for Wrapping<i128>
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<i64>> for &'b Wrapping<i64>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<i16>> for &'b Wrapping<i16>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a> Sub<Wrapping<i16>> for &'a Wrapping<i16>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a> Sub<&'a Wrapping<i32>> for Wrapping<i32>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a> Sub<Wrapping<i64>> for &'a Wrapping<i64>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl Sub<Wrapping<u64>> for Wrapping<u64>
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<u16>> for &'b Wrapping<u16>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a> Sub<Wrapping<u32>> for &'a Wrapping<u32>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl Sub<Wrapping<i32>> for Wrapping<i32>
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a> Sub<Wrapping<u8>> for &'a Wrapping<u8>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a> Sub<&'a Wrapping<usize>> for Wrapping<usize>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl Sub<Wrapping<u8>> for Wrapping<u8>
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a> Sub<&'a Wrapping<i16>> for Wrapping<i16>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a> Sub<Wrapping<u16>> for &'a Wrapping<u16>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl Sub<Wrapping<u32>> for Wrapping<u32>
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<i32>> for &'b Wrapping<i32>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<u64>> for &'b Wrapping<u64>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl Sub<Wrapping<i64>> for Wrapping<i64>
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a> Sub<Wrapping<u64>> for &'a Wrapping<u64>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a> Sub<Wrapping<usize>> for &'a Wrapping<usize>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<u32>> for &'b Wrapping<u32>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a> Sub<&'a Wrapping<i8>> for Wrapping<i8>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl Sub<Wrapping<isize>> for Wrapping<isize>
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl Sub<Wrapping<usize>> for Wrapping<usize>
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<i8>> for &'b Wrapping<i8>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<isize>> for &'b Wrapping<isize>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a> Sub<Wrapping<i32>> for &'a Wrapping<i32>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a> Sub<Wrapping<i8>> for &'a Wrapping<i8>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl Sub<Wrapping<u128>> for Wrapping<u128>
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a> Sub<&'a Wrapping<isize>> for Wrapping<isize>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl Sub<Wrapping<i8>> for Wrapping<i8>
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a> Sub<&'a Wrapping<u64>> for Wrapping<u64>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a> Sub<Wrapping<i128>> for &'a Wrapping<i128>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a> Sub<Wrapping<isize>> for &'a Wrapping<isize>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a> Sub<&'a Wrapping<u32>> for Wrapping<u32>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<i128>> for &'b Wrapping<i128>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a> Sub<&'a Wrapping<u128>> for Wrapping<u128>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a> Sub<&'a Wrapping<i128>> for Wrapping<i128>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<usize>> for &'b Wrapping<usize>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl<'a> Sub<Wrapping<u128>> for &'a Wrapping<u128>
1.14.0
[src]

The resulting type after applying the - operator.

Performs the - operation.

impl Shr<usize> for Wrapping<isize>
[src]

The resulting type after applying the >> operator.

Performs the >> operation.

impl Shr<usize> for Wrapping<u128>
[src]

The resulting type after applying the >> operator.

Performs the >> operation.

impl Shr<usize> for Wrapping<u16>
[src]

The resulting type after applying the >> operator.

Performs the >> operation.

impl Shr<usize> for Wrapping<i8>
[src]

The resulting type after applying the >> operator.

Performs the >> operation.

impl Shr<usize> for Wrapping<i16>
[src]

The resulting type after applying the >> operator.

Performs the >> operation.

impl Shr<usize> for Wrapping<i64>
[src]

The resulting type after applying the >> operator.

Performs the >> operation.

impl Shr<usize> for Wrapping<i128>
[src]

The resulting type after applying the >> operator.

Performs the >> operation.

impl Shr<usize> for Wrapping<usize>
[src]

The resulting type after applying the >> operator.

Performs the >> operation.

impl Shr<usize> for Wrapping<i32>
[src]

The resulting type after applying the >> operator.

Performs the >> operation.

impl Shr<usize> for Wrapping<u32>
[src]

The resulting type after applying the >> operator.

Performs the >> operation.

impl Shr<usize> for Wrapping<u8>
[src]

The resulting type after applying the >> operator.

Performs the >> operation.

impl Shr<usize> for Wrapping<u64>
[src]

The resulting type after applying the >> operator.

Performs the >> operation.

impl<T> Eq for Wrapping<T> where
    T: Eq
[src]

impl<'a> Product<&'a Wrapping<i32>> for Wrapping<i32>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

impl<'a> Product<&'a Wrapping<i8>> for Wrapping<i8>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

impl Product<Wrapping<u128>> for Wrapping<u128>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

impl Product<Wrapping<u8>> for Wrapping<u8>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

impl<'a> Product<&'a Wrapping<u16>> for Wrapping<u16>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

impl<'a> Product<&'a Wrapping<i128>> for Wrapping<i128>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

impl<'a> Product<&'a Wrapping<u128>> for Wrapping<u128>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

impl<'a> Product<&'a Wrapping<i16>> for Wrapping<i16>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

impl<'a> Product<&'a Wrapping<u64>> for Wrapping<u64>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

impl<'a> Product<&'a Wrapping<u8>> for Wrapping<u8>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

impl Product<Wrapping<u64>> for Wrapping<u64>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

impl Product<Wrapping<i32>> for Wrapping<i32>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

impl Product<Wrapping<i128>> for Wrapping<i128>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

impl Product<Wrapping<i8>> for Wrapping<i8>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

impl<'a> Product<&'a Wrapping<u32>> for Wrapping<u32>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

impl Product<Wrapping<u16>> for Wrapping<u16>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

impl<'a> Product<&'a Wrapping<isize>> for Wrapping<isize>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

impl Product<Wrapping<i64>> for Wrapping<i64>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

impl Product<Wrapping<usize>> for Wrapping<usize>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

impl Product<Wrapping<isize>> for Wrapping<isize>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

impl Product<Wrapping<u32>> for Wrapping<u32>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

impl<'a> Product<&'a Wrapping<usize>> for Wrapping<usize>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

impl Product<Wrapping<i16>> for Wrapping<i16>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

impl<'a> Product<&'a Wrapping<i64>> for Wrapping<i64>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by multiplying the items. Read more

impl<'a> Rem<&'a Wrapping<i8>> for Wrapping<i8>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a> Rem<&'a Wrapping<u8>> for Wrapping<u8>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a> Rem<&'a Wrapping<i128>> for Wrapping<i128>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a> Rem<&'a Wrapping<u64>> for Wrapping<u64>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<i128>> for &'b Wrapping<i128>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a> Rem<&'a Wrapping<i16>> for Wrapping<i16>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a> Rem<&'a Wrapping<isize>> for Wrapping<isize>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a> Rem<Wrapping<usize>> for &'a Wrapping<usize>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a> Rem<Wrapping<i16>> for &'a Wrapping<i16>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl Rem<Wrapping<u32>> for Wrapping<u32>
1.7.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl Rem<Wrapping<i64>> for Wrapping<i64>
1.7.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl Rem<Wrapping<i128>> for Wrapping<i128>
1.7.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a> Rem<Wrapping<i128>> for &'a Wrapping<i128>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a> Rem<Wrapping<u16>> for &'a Wrapping<u16>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl Rem<Wrapping<u128>> for Wrapping<u128>
1.7.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<usize>> for &'b Wrapping<usize>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<isize>> for &'b Wrapping<isize>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<u16>> for &'b Wrapping<u16>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a> Rem<Wrapping<u64>> for &'a Wrapping<u64>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<u128>> for &'b Wrapping<u128>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a> Rem<Wrapping<isize>> for &'a Wrapping<isize>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl Rem<Wrapping<isize>> for Wrapping<isize>
1.7.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<i64>> for &'b Wrapping<i64>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a> Rem<Wrapping<i64>> for &'a Wrapping<i64>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a> Rem<&'a Wrapping<u32>> for Wrapping<u32>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<u32>> for &'b Wrapping<u32>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<i8>> for &'b Wrapping<i8>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a> Rem<Wrapping<u128>> for &'a Wrapping<u128>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a> Rem<&'a Wrapping<u16>> for Wrapping<u16>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a> Rem<Wrapping<u8>> for &'a Wrapping<u8>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl Rem<Wrapping<usize>> for Wrapping<usize>
1.7.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<u64>> for &'b Wrapping<u64>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a> Rem<&'a Wrapping<u128>> for Wrapping<u128>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a> Rem<Wrapping<i32>> for &'a Wrapping<i32>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl Rem<Wrapping<i16>> for Wrapping<i16>
1.7.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<i32>> for &'b Wrapping<i32>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl Rem<Wrapping<u8>> for Wrapping<u8>
1.7.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<i16>> for &'b Wrapping<i16>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a> Rem<Wrapping<i8>> for &'a Wrapping<i8>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl Rem<Wrapping<i8>> for Wrapping<i8>
1.7.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl Rem<Wrapping<i32>> for Wrapping<i32>
1.7.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a> Rem<&'a Wrapping<usize>> for Wrapping<usize>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a> Rem<&'a Wrapping<i32>> for Wrapping<i32>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl Rem<Wrapping<u16>> for Wrapping<u16>
1.7.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a> Rem<Wrapping<u32>> for &'a Wrapping<u32>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl Rem<Wrapping<u64>> for Wrapping<u64>
1.7.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a> Rem<&'a Wrapping<i64>> for Wrapping<i64>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<u8>> for &'b Wrapping<u8>
1.14.0
[src]

The resulting type after applying the % operator.

Performs the % operation.

impl Shl<usize> for Wrapping<u128>
[src]

The resulting type after applying the << operator.

Performs the << operation.

impl Shl<usize> for Wrapping<isize>
[src]

The resulting type after applying the << operator.

Performs the << operation.

impl Shl<usize> for Wrapping<i16>
[src]

The resulting type after applying the << operator.

Performs the << operation.

impl Shl<usize> for Wrapping<u32>
[src]

The resulting type after applying the << operator.

Performs the << operation.

impl Shl<usize> for Wrapping<u8>
[src]

The resulting type after applying the << operator.

Performs the << operation.

impl Shl<usize> for Wrapping<u16>
[src]

The resulting type after applying the << operator.

Performs the << operation.

impl Shl<usize> for Wrapping<u64>
[src]

The resulting type after applying the << operator.

Performs the << operation.

impl Shl<usize> for Wrapping<i32>
[src]

The resulting type after applying the << operator.

Performs the << operation.

impl Shl<usize> for Wrapping<i128>
[src]

The resulting type after applying the << operator.

Performs the << operation.

impl Shl<usize> for Wrapping<i64>
[src]

The resulting type after applying the << operator.

Performs the << operation.

impl Shl<usize> for Wrapping<i8>
[src]

The resulting type after applying the << operator.

Performs the << operation.

impl Shl<usize> for Wrapping<usize>
[src]

The resulting type after applying the << operator.

Performs the << operation.

impl<T> Hash for Wrapping<T> where
    T: Hash
[src]

Feeds this value into the given [Hasher]. Read more

Feeds a slice of this type into the given [Hasher]. Read more

impl<'a, 'b> BitAnd<&'a Wrapping<isize>> for &'b Wrapping<isize>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<u128>> for Wrapping<u128>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl BitAnd<Wrapping<u32>> for Wrapping<u32>
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<u8>> for Wrapping<u8>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<isize>> for Wrapping<isize>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a> BitAnd<Wrapping<u32>> for &'a Wrapping<u32>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<i128>> for &'b Wrapping<i128>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<u8>> for &'b Wrapping<u8>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a> BitAnd<Wrapping<u16>> for &'a Wrapping<u16>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl BitAnd<Wrapping<u128>> for Wrapping<u128>
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a> BitAnd<Wrapping<i8>> for &'a Wrapping<i8>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<u64>> for Wrapping<u64>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<i16>> for Wrapping<i16>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a> BitAnd<Wrapping<i64>> for &'a Wrapping<i64>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl BitAnd<Wrapping<u64>> for Wrapping<u64>
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<u64>> for &'b Wrapping<u64>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl BitAnd<Wrapping<usize>> for Wrapping<usize>
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl BitAnd<Wrapping<i64>> for Wrapping<i64>
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<i32>> for &'b Wrapping<i32>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<i8>> for &'b Wrapping<i8>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<u32>> for Wrapping<u32>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a> BitAnd<Wrapping<u128>> for &'a Wrapping<u128>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<i64>> for &'b Wrapping<i64>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a> BitAnd<Wrapping<u64>> for &'a Wrapping<u64>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<i32>> for Wrapping<i32>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<usize>> for Wrapping<usize>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a> BitAnd<Wrapping<isize>> for &'a Wrapping<isize>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<i128>> for Wrapping<i128>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a> BitAnd<Wrapping<i16>> for &'a Wrapping<i16>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<i64>> for Wrapping<i64>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl BitAnd<Wrapping<i8>> for Wrapping<i8>
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a> BitAnd<Wrapping<u8>> for &'a Wrapping<u8>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl BitAnd<Wrapping<i32>> for Wrapping<i32>
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<usize>> for &'b Wrapping<usize>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a> BitAnd<Wrapping<usize>> for &'a Wrapping<usize>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<u16>> for &'b Wrapping<u16>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<u16>> for Wrapping<u16>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl BitAnd<Wrapping<isize>> for Wrapping<isize>
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl BitAnd<Wrapping<u8>> for Wrapping<u8>
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl BitAnd<Wrapping<i16>> for Wrapping<i16>
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a> BitAnd<Wrapping<i32>> for &'a Wrapping<i32>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl BitAnd<Wrapping<u16>> for Wrapping<u16>
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<u128>> for &'b Wrapping<u128>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl BitAnd<Wrapping<i128>> for Wrapping<i128>
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<i8>> for Wrapping<i8>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a> BitAnd<Wrapping<i128>> for &'a Wrapping<i128>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<i16>> for &'b Wrapping<i16>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<u32>> for &'b Wrapping<u32>
1.14.0
[src]

The resulting type after applying the & operator.

Performs the & operation.

impl<T> Binary for Wrapping<T> where
    T: Binary
1.11.0
[src]

Formats the value using the given formatter.

impl<'a> ShlAssign<&'a usize> for Wrapping<u8>
1.22.0
[src]

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<i64>
1.8.0
[src]

Performs the <<= operation.

impl<'a> ShlAssign<&'a usize> for Wrapping<u64>
1.22.0
[src]

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<u32>
1.8.0
[src]

Performs the <<= operation.

impl<'a> ShlAssign<&'a usize> for Wrapping<u16>
1.22.0
[src]

Performs the <<= operation.

impl<'a> ShlAssign<&'a usize> for Wrapping<i8>
1.22.0
[src]

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<u128>
1.8.0
[src]

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<usize>
1.8.0
[src]

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<u16>
1.8.0
[src]

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<u8>
1.8.0
[src]

Performs the <<= operation.

impl<'a> ShlAssign<&'a usize> for Wrapping<u128>
1.22.0
[src]

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<i8>
1.8.0
[src]

Performs the <<= operation.

impl<'a> ShlAssign<&'a usize> for Wrapping<usize>
1.22.0
[src]

Performs the <<= operation.

impl<'a> ShlAssign<&'a usize> for Wrapping<i128>
1.22.0
[src]

Performs the <<= operation.

impl<'a> ShlAssign<&'a usize> for Wrapping<i32>
1.22.0
[src]

Performs the <<= operation.

impl<'a> ShlAssign<&'a usize> for Wrapping<i64>
1.22.0
[src]

Performs the <<= operation.

impl<'a> ShlAssign<&'a usize> for Wrapping<isize>
1.22.0
[src]

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<u64>
1.8.0
[src]

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<i128>
1.8.0
[src]

Performs the <<= operation.

impl<'a> ShlAssign<&'a usize> for Wrapping<u32>
1.22.0
[src]

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<i16>
1.8.0
[src]

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<isize>
1.8.0
[src]

Performs the <<= operation.

impl<'a> ShlAssign<&'a usize> for Wrapping<i16>
1.22.0
[src]

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<i32>
1.8.0
[src]

Performs the <<= operation.

impl<'a, 'b> Div<&'a Wrapping<i32>> for &'b Wrapping<i32>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl Div<Wrapping<u8>> for Wrapping<u8>
1.3.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a> Div<Wrapping<usize>> for &'a Wrapping<usize>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<usize>> for &'b Wrapping<usize>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a> Div<Wrapping<u16>> for &'a Wrapping<u16>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<i64>> for &'b Wrapping<i64>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a> Div<&'a Wrapping<i32>> for Wrapping<i32>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a> Div<Wrapping<u8>> for &'a Wrapping<u8>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a> Div<Wrapping<i32>> for &'a Wrapping<i32>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<i8>> for &'b Wrapping<i8>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl Div<Wrapping<i32>> for Wrapping<i32>
1.3.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a> Div<Wrapping<i8>> for &'a Wrapping<i8>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl Div<Wrapping<u64>> for Wrapping<u64>
1.3.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl Div<Wrapping<u16>> for Wrapping<u16>
1.3.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl Div<Wrapping<usize>> for Wrapping<usize>
1.3.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a> Div<&'a Wrapping<u32>> for Wrapping<u32>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a> Div<&'a Wrapping<u8>> for Wrapping<u8>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a> Div<&'a Wrapping<u64>> for Wrapping<u64>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl Div<Wrapping<i16>> for Wrapping<i16>
1.3.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl Div<Wrapping<u32>> for Wrapping<u32>
1.3.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<u16>> for &'b Wrapping<u16>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a> Div<Wrapping<i128>> for &'a Wrapping<i128>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<i128>> for &'b Wrapping<i128>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a> Div<&'a Wrapping<isize>> for Wrapping<isize>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<u8>> for &'b Wrapping<u8>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a> Div<&'a Wrapping<u128>> for Wrapping<u128>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a> Div<&'a Wrapping<usize>> for Wrapping<usize>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a> Div<Wrapping<u128>> for &'a Wrapping<u128>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl Div<Wrapping<i64>> for Wrapping<i64>
1.3.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a> Div<Wrapping<i64>> for &'a Wrapping<i64>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a> Div<&'a Wrapping<i8>> for Wrapping<i8>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl Div<Wrapping<i128>> for Wrapping<i128>
1.3.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a> Div<Wrapping<u64>> for &'a Wrapping<u64>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<i16>> for &'b Wrapping<i16>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a> Div<Wrapping<u32>> for &'a Wrapping<u32>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a> Div<Wrapping<i16>> for &'a Wrapping<i16>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<u32>> for &'b Wrapping<u32>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a> Div<&'a Wrapping<u16>> for Wrapping<u16>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a> Div<&'a Wrapping<i16>> for Wrapping<i16>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl Div<Wrapping<i8>> for Wrapping<i8>
1.3.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl Div<Wrapping<u128>> for Wrapping<u128>
1.3.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a> Div<&'a Wrapping<i128>> for Wrapping<i128>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<u128>> for &'b Wrapping<u128>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<u64>> for &'b Wrapping<u64>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a> Div<&'a Wrapping<i64>> for Wrapping<i64>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<isize>> for &'b Wrapping<isize>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<'a> Div<Wrapping<isize>> for &'a Wrapping<isize>
1.14.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl Div<Wrapping<isize>> for Wrapping<isize>
1.3.0
[src]

The resulting type after applying the / operator.

Performs the / operation.

impl<T> Debug for Wrapping<T> where
    T: Debug
[src]

Formats the value using the given formatter. Read more

impl BitOrAssign<Wrapping<usize>> for Wrapping<usize>
1.8.0
[src]

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<i32>> for Wrapping<i32>
1.22.0
[src]

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<u8>> for Wrapping<u8>
1.22.0
[src]

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<i128>> for Wrapping<i128>
1.22.0
[src]

Performs the |= operation.

impl BitOrAssign<Wrapping<isize>> for Wrapping<isize>
1.8.0
[src]

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<u16>> for Wrapping<u16>
1.22.0
[src]

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<i64>> for Wrapping<i64>
1.22.0
[src]

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<u32>> for Wrapping<u32>
1.22.0
[src]

Performs the |= operation.

impl BitOrAssign<Wrapping<i64>> for Wrapping<i64>
1.8.0
[src]

Performs the |= operation.

impl BitOrAssign<Wrapping<i16>> for Wrapping<i16>
1.8.0
[src]

Performs the |= operation.

impl BitOrAssign<Wrapping<u16>> for Wrapping<u16>
1.8.0
[src]

Performs the |= operation.

impl BitOrAssign<Wrapping<u64>> for Wrapping<u64>
1.8.0
[src]

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<u128>> for Wrapping<u128>
1.22.0
[src]

Performs the |= operation.

impl BitOrAssign<Wrapping<u8>> for Wrapping<u8>
1.8.0
[src]

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<usize>> for Wrapping<usize>
1.22.0
[src]

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<i16>> for Wrapping<i16>
1.22.0
[src]

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<i8>> for Wrapping<i8>
1.22.0
[src]

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<isize>> for Wrapping<isize>
1.22.0
[src]

Performs the |= operation.

impl BitOrAssign<Wrapping<i32>> for Wrapping<i32>
1.8.0
[src]

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<u64>> for Wrapping<u64>
1.22.0
[src]

Performs the |= operation.

impl BitOrAssign<Wrapping<i8>> for Wrapping<i8>
1.8.0
[src]

Performs the |= operation.

impl BitOrAssign<Wrapping<i128>> for Wrapping<i128>
1.8.0
[src]

Performs the |= operation.

impl BitOrAssign<Wrapping<u128>> for Wrapping<u128>
1.8.0
[src]

Performs the |= operation.

impl BitOrAssign<Wrapping<u32>> for Wrapping<u32>
1.8.0
[src]

Performs the |= operation.

impl<'a, 'b> Add<&'a Wrapping<usize>> for &'b Wrapping<usize>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<i32>> for &'b Wrapping<i32>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl Add<Wrapping<u16>> for Wrapping<u16>
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl Add<Wrapping<i8>> for Wrapping<i8>
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl Add<Wrapping<usize>> for Wrapping<usize>
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<u64>> for &'b Wrapping<u64>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a> Add<&'a Wrapping<u64>> for Wrapping<u64>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a> Add<Wrapping<u8>> for &'a Wrapping<u8>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<u8>> for &'b Wrapping<u8>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a> Add<&'a Wrapping<u8>> for Wrapping<u8>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a> Add<Wrapping<u64>> for &'a Wrapping<u64>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a> Add<Wrapping<u32>> for &'a Wrapping<u32>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<i64>> for &'b Wrapping<i64>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<i16>> for &'b Wrapping<i16>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<isize>> for &'b Wrapping<isize>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl Add<Wrapping<i16>> for Wrapping<i16>
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a> Add<Wrapping<u16>> for &'a Wrapping<u16>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<u128>> for &'b Wrapping<u128>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a> Add<&'a Wrapping<i16>> for Wrapping<i16>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl Add<Wrapping<i32>> for Wrapping<i32>
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a> Add<Wrapping<i16>> for &'a Wrapping<i16>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a> Add<Wrapping<i8>> for &'a Wrapping<i8>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a> Add<Wrapping<i64>> for &'a Wrapping<i64>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a> Add<Wrapping<usize>> for &'a Wrapping<usize>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a> Add<&'a Wrapping<usize>> for Wrapping<usize>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a> Add<&'a Wrapping<u16>> for Wrapping<u16>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<i8>> for &'b Wrapping<i8>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a> Add<&'a Wrapping<i128>> for Wrapping<i128>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a> Add<&'a Wrapping<isize>> for Wrapping<isize>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a> Add<Wrapping<isize>> for &'a Wrapping<isize>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a> Add<&'a Wrapping<u32>> for Wrapping<u32>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl Add<Wrapping<u128>> for Wrapping<u128>
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl Add<Wrapping<u64>> for Wrapping<u64>
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a> Add<Wrapping<u128>> for &'a Wrapping<u128>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a> Add<&'a Wrapping<u128>> for Wrapping<u128>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl Add<Wrapping<isize>> for Wrapping<isize>
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a> Add<&'a Wrapping<i32>> for Wrapping<i32>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl Add<Wrapping<u8>> for Wrapping<u8>
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<u32>> for &'b Wrapping<u32>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a> Add<Wrapping<i128>> for &'a Wrapping<i128>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a> Add<&'a Wrapping<i64>> for Wrapping<i64>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<u16>> for &'b Wrapping<u16>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl Add<Wrapping<u32>> for Wrapping<u32>
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<i128>> for &'b Wrapping<i128>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a> Add<Wrapping<i32>> for &'a Wrapping<i32>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl Add<Wrapping<i64>> for Wrapping<i64>
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl<'a> Add<&'a Wrapping<i8>> for Wrapping<i8>
1.14.0
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl Add<Wrapping<i128>> for Wrapping<i128>
[src]

The resulting type after applying the + operator.

Performs the + operation.

impl DivAssign<Wrapping<i16>> for Wrapping<i16>
1.8.0
[src]

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<i8>> for Wrapping<i8>
1.22.0
[src]

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<i16>> for Wrapping<i16>
1.22.0
[src]

Performs the /= operation.

impl DivAssign<Wrapping<i8>> for Wrapping<i8>
1.8.0
[src]

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<u32>> for Wrapping<u32>
1.22.0
[src]

Performs the /= operation.

impl DivAssign<Wrapping<u64>> for Wrapping<u64>
1.8.0
[src]

Performs the /= operation.

impl DivAssign<Wrapping<u128>> for Wrapping<u128>
1.8.0
[src]

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<u64>> for Wrapping<u64>
1.22.0
[src]

Performs the /= operation.

impl DivAssign<Wrapping<isize>> for Wrapping<isize>
1.8.0
[src]

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<i64>> for Wrapping<i64>
1.22.0
[src]

Performs the /= operation.

impl DivAssign<Wrapping<u8>> for Wrapping<u8>
1.8.0
[src]

Performs the /= operation.

impl DivAssign<Wrapping<u16>> for Wrapping<u16>
1.8.0
[src]

Performs the /= operation.

impl DivAssign<Wrapping<i128>> for Wrapping<i128>
1.8.0
[src]

Performs the /= operation.

impl DivAssign<Wrapping<u32>> for Wrapping<u32>
1.8.0
[src]

Performs the /= operation.

impl DivAssign<Wrapping<i64>> for Wrapping<i64>
1.8.0
[src]

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<usize>> for Wrapping<usize>
1.22.0
[src]

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<i32>> for Wrapping<i32>
1.22.0
[src]

Performs the /= operation.

impl DivAssign<Wrapping<usize>> for Wrapping<usize>
1.8.0
[src]

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<u128>> for Wrapping<u128>
1.22.0
[src]

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<isize>> for Wrapping<isize>
1.22.0
[src]

Performs the /= operation.

impl DivAssign<Wrapping<i32>> for Wrapping<i32>
1.8.0
[src]

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<u8>> for Wrapping<u8>
1.22.0
[src]

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<u16>> for Wrapping<u16>
1.22.0
[src]

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<i128>> for Wrapping<i128>
1.22.0
[src]

Performs the /= operation.

impl<'a> SubAssign<&'a Wrapping<i32>> for Wrapping<i32>
1.22.0
[src]

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<i64>> for Wrapping<i64>
1.22.0
[src]

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<u64>> for Wrapping<u64>
1.22.0
[src]

Performs the -= operation.

impl SubAssign<Wrapping<i32>> for Wrapping<i32>
1.8.0
[src]

Performs the -= operation.

impl SubAssign<Wrapping<i16>> for Wrapping<i16>
1.8.0
[src]

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<u32>> for Wrapping<u32>
1.22.0
[src]

Performs the -= operation.

impl SubAssign<Wrapping<u128>> for Wrapping<u128>
1.8.0
[src]

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<u8>> for Wrapping<u8>
1.22.0
[src]

Performs the -= operation.

impl SubAssign<Wrapping<u64>> for Wrapping<u64>
1.8.0
[src]

Performs the -= operation.

impl SubAssign<Wrapping<usize>> for Wrapping<usize>
1.8.0
[src]

Performs the -= operation.

impl SubAssign<Wrapping<i64>> for Wrapping<i64>
1.8.0
[src]

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<i8>> for Wrapping<i8>
1.22.0
[src]

Performs the -= operation.

impl SubAssign<Wrapping<i8>> for Wrapping<i8>
1.8.0
[src]

Performs the -= operation.

impl SubAssign<Wrapping<u32>> for Wrapping<u32>
1.8.0
[src]

Performs the -= operation.

impl SubAssign<Wrapping<isize>> for Wrapping<isize>
1.8.0
[src]

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<isize>> for Wrapping<isize>
1.22.0
[src]

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<i128>> for Wrapping<i128>
1.22.0
[src]

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<u16>> for Wrapping<u16>
1.22.0
[src]

Performs the -= operation.

impl SubAssign<Wrapping<u16>> for Wrapping<u16>
1.8.0
[src]

Performs the -= operation.

impl SubAssign<Wrapping<u8>> for Wrapping<u8>
1.8.0
[src]

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<usize>> for Wrapping<usize>
1.22.0
[src]

Performs the -= operation.

impl SubAssign<Wrapping<i128>> for Wrapping<i128>
1.8.0
[src]

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<i16>> for Wrapping<i16>
1.22.0
[src]

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<u128>> for Wrapping<u128>
1.22.0
[src]

Performs the -= operation.

impl<T> Ord for Wrapping<T> where
    T: Ord
[src]

This method returns an Ordering between self and other. Read more

Compares and returns the maximum of two values. Read more

Compares and returns the minimum of two values. Read more

impl<'a, 'b> BitXor<&'a Wrapping<i16>> for &'b Wrapping<i16>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a> BitXor<Wrapping<i128>> for &'a Wrapping<i128>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<i64>> for Wrapping<i64>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl BitXor<Wrapping<u32>> for Wrapping<u32>
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<isize>> for &'b Wrapping<isize>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a> BitXor<Wrapping<u16>> for &'a Wrapping<u16>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<i32>> for &'b Wrapping<i32>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<usize>> for &'b Wrapping<usize>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a> BitXor<Wrapping<u64>> for &'a Wrapping<u64>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a> BitXor<Wrapping<isize>> for &'a Wrapping<isize>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<i32>> for Wrapping<i32>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a> BitXor<Wrapping<i16>> for &'a Wrapping<i16>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl BitXor<Wrapping<u64>> for Wrapping<u64>
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl BitXor<Wrapping<i128>> for Wrapping<i128>
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<u8>> for &'b Wrapping<u8>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl BitXor<Wrapping<i16>> for Wrapping<i16>
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl BitXor<Wrapping<i64>> for Wrapping<i64>
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<usize>> for Wrapping<usize>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl BitXor<Wrapping<usize>> for Wrapping<usize>
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<i128>> for Wrapping<i128>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<u16>> for Wrapping<u16>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a> BitXor<Wrapping<u32>> for &'a Wrapping<u32>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a> BitXor<Wrapping<usize>> for &'a Wrapping<usize>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a> BitXor<Wrapping<i64>> for &'a Wrapping<i64>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl BitXor<Wrapping<u8>> for Wrapping<u8>
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<i16>> for Wrapping<i16>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<isize>> for Wrapping<isize>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<u128>> for &'b Wrapping<u128>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a> BitXor<Wrapping<i8>> for &'a Wrapping<i8>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<u64>> for &'b Wrapping<u64>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<i8>> for &'b Wrapping<i8>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<i128>> for &'b Wrapping<i128>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<u32>> for &'b Wrapping<u32>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<u32>> for Wrapping<u32>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<u64>> for Wrapping<u64>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl BitXor<Wrapping<isize>> for Wrapping<isize>
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<u128>> for Wrapping<u128>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl BitXor<Wrapping<u128>> for Wrapping<u128>
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl BitXor<Wrapping<i8>> for Wrapping<i8>
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl BitXor<Wrapping<u16>> for Wrapping<u16>
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a> BitXor<Wrapping<u128>> for &'a Wrapping<u128>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<i8>> for Wrapping<i8>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a> BitXor<Wrapping<u8>> for &'a Wrapping<u8>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<u8>> for Wrapping<u8>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl BitXor<Wrapping<i32>> for Wrapping<i32>
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<i64>> for &'b Wrapping<i64>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a> BitXor<Wrapping<i32>> for &'a Wrapping<i32>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<u16>> for &'b Wrapping<u16>
1.14.0
[src]

The resulting type after applying the ^ operator.

Performs the ^ operation.

impl<T> PartialEq<Wrapping<T>> for Wrapping<T> where
    T: PartialEq<T>, 
[src]

This method tests for self and other values to be equal, and is used by ==. Read more

This method tests for !=.

impl Not for Wrapping<i64>
[src]

The resulting type after applying the ! operator.

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<i8>
1.14.0
[src]

The resulting type after applying the ! operator.

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<usize>
1.14.0
[src]

The resulting type after applying the ! operator.

Performs the unary ! operation.

impl Not for Wrapping<u128>
[src]

The resulting type after applying the ! operator.

Performs the unary ! operation.

impl Not for Wrapping<i128>
[src]

The resulting type after applying the ! operator.

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<u32>
1.14.0
[src]

The resulting type after applying the ! operator.

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<u128>
1.14.0
[src]

The resulting type after applying the ! operator.

Performs the unary ! operation.

impl Not for Wrapping<u16>
[src]

The resulting type after applying the ! operator.

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<i128>
1.14.0
[src]

The resulting type after applying the ! operator.

Performs the unary ! operation.

impl Not for Wrapping<i16>
[src]

The resulting type after applying the ! operator.

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<isize>
1.14.0
[src]

The resulting type after applying the ! operator.

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<u64>
1.14.0
[src]

The resulting type after applying the ! operator.

Performs the unary ! operation.

impl Not for Wrapping<u8>
[src]

The resulting type after applying the ! operator.

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<i64>
1.14.0
[src]

The resulting type after applying the ! operator.

Performs the unary ! operation.

impl Not for Wrapping<u32>
[src]

The resulting type after applying the ! operator.

Performs the unary ! operation.

impl Not for Wrapping<i32>
[src]

The resulting type after applying the ! operator.

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<i32>
1.14.0
[src]

The resulting type after applying the ! operator.

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<i16>
1.14.0
[src]

The resulting type after applying the ! operator.

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<u16>
1.14.0
[src]

The resulting type after applying the ! operator.

Performs the unary ! operation.

impl Not for Wrapping<u64>
[src]

The resulting type after applying the ! operator.

Performs the unary ! operation.

impl Not for Wrapping<usize>
[src]

The resulting type after applying the ! operator.

Performs the unary ! operation.

impl Not for Wrapping<i8>
[src]

The resulting type after applying the ! operator.

Performs the unary ! operation.

impl Not for Wrapping<isize>
[src]

The resulting type after applying the ! operator.

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<u8>
1.14.0
[src]

The resulting type after applying the ! operator.

Performs the unary ! operation.

impl<T> Copy for Wrapping<T> where
    T: Copy
[src]

impl<T> LowerHex for Wrapping<T> where
    T: LowerHex
1.11.0
[src]

Formats the value using the given formatter.

impl<T> Display for Wrapping<T> where
    T: Display
1.10.0
[src]

Formats the value using the given formatter. Read more

impl<'a> Mul<Wrapping<i16>> for &'a Wrapping<i16>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a> Mul<Wrapping<i8>> for &'a Wrapping<i8>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a> Mul<&'a Wrapping<u16>> for Wrapping<u16>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a> Mul<Wrapping<i64>> for &'a Wrapping<i64>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<u64>> for &'b Wrapping<u64>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<i8>> for &'b Wrapping<i8>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<u32>> for &'b Wrapping<u32>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a> Mul<&'a Wrapping<u32>> for Wrapping<u32>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a> Mul<Wrapping<u8>> for &'a Wrapping<u8>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<u16>> for &'b Wrapping<u16>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a> Mul<&'a Wrapping<i64>> for Wrapping<i64>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a> Mul<Wrapping<isize>> for &'a Wrapping<isize>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl Mul<Wrapping<i8>> for Wrapping<i8>
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl Mul<Wrapping<u64>> for Wrapping<u64>
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a> Mul<&'a Wrapping<isize>> for Wrapping<isize>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl Mul<Wrapping<u8>> for Wrapping<u8>
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a> Mul<&'a Wrapping<usize>> for Wrapping<usize>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a> Mul<Wrapping<i32>> for &'a Wrapping<i32>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a> Mul<&'a Wrapping<i8>> for Wrapping<i8>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<i32>> for &'b Wrapping<i32>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl Mul<Wrapping<usize>> for Wrapping<usize>
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl Mul<Wrapping<i128>> for Wrapping<i128>
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a> Mul<&'a Wrapping<u8>> for Wrapping<u8>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a> Mul<&'a Wrapping<u128>> for Wrapping<u128>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a> Mul<&'a Wrapping<u64>> for Wrapping<u64>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<usize>> for &'b Wrapping<usize>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<isize>> for &'b Wrapping<isize>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a> Mul<Wrapping<u32>> for &'a Wrapping<u32>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a> Mul<&'a Wrapping<i128>> for Wrapping<i128>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<u8>> for &'b Wrapping<u8>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a> Mul<Wrapping<u128>> for &'a Wrapping<u128>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<i16>> for &'b Wrapping<i16>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl Mul<Wrapping<isize>> for Wrapping<isize>
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a> Mul<Wrapping<u64>> for &'a Wrapping<u64>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a> Mul<&'a Wrapping<i16>> for Wrapping<i16>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl Mul<Wrapping<i32>> for Wrapping<i32>
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<i128>> for &'b Wrapping<i128>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl Mul<Wrapping<i16>> for Wrapping<i16>
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a> Mul<Wrapping<usize>> for &'a Wrapping<usize>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a> Mul<&'a Wrapping<i32>> for Wrapping<i32>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl Mul<Wrapping<u32>> for Wrapping<u32>
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl Mul<Wrapping<u128>> for Wrapping<u128>
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl Mul<Wrapping<u16>> for Wrapping<u16>
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<u128>> for &'b Wrapping<u128>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl Mul<Wrapping<i64>> for Wrapping<i64>
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a> Mul<Wrapping<u16>> for &'a Wrapping<u16>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<i64>> for &'b Wrapping<i64>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<'a> Mul<Wrapping<i128>> for &'a Wrapping<i128>
1.14.0
[src]

The resulting type after applying the * operator.

Performs the * operation.

impl<T> Default for Wrapping<T> where
    T: Default
[src]

Returns the "default value" for a type. Read more

impl Sum<Wrapping<isize>> for Wrapping<isize>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by "summing up" the items. Read more

impl<'a> Sum<&'a Wrapping<i16>> for Wrapping<i16>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by "summing up" the items. Read more

impl Sum<Wrapping<u16>> for Wrapping<u16>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by "summing up" the items. Read more

impl<'a> Sum<&'a Wrapping<i32>> for Wrapping<i32>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by "summing up" the items. Read more

impl<'a> Sum<&'a Wrapping<i128>> for Wrapping<i128>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by "summing up" the items. Read more

impl Sum<Wrapping<u32>> for Wrapping<u32>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by "summing up" the items. Read more

impl<'a> Sum<&'a Wrapping<i64>> for Wrapping<i64>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by "summing up" the items. Read more

impl<'a> Sum<&'a Wrapping<u32>> for Wrapping<u32>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by "summing up" the items. Read more

impl<'a> Sum<&'a Wrapping<u128>> for Wrapping<u128>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by "summing up" the items. Read more

impl Sum<Wrapping<i16>> for Wrapping<i16>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by "summing up" the items. Read more

impl<'a> Sum<&'a Wrapping<i8>> for Wrapping<i8>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by "summing up" the items. Read more

impl Sum<Wrapping<i64>> for Wrapping<i64>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by "summing up" the items. Read more

impl<'a> Sum<&'a Wrapping<isize>> for Wrapping<isize>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by "summing up" the items. Read more

impl Sum<Wrapping<i128>> for Wrapping<i128>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by "summing up" the items. Read more

impl<'a> Sum<&'a Wrapping<u64>> for Wrapping<u64>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by "summing up" the items. Read more

impl<'a> Sum<&'a Wrapping<u16>> for Wrapping<u16>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by "summing up" the items. Read more

impl<'a> Sum<&'a Wrapping<u8>> for Wrapping<u8>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by "summing up" the items. Read more

impl<'a> Sum<&'a Wrapping<usize>> for Wrapping<usize>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by "summing up" the items. Read more

impl Sum<Wrapping<u64>> for Wrapping<u64>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by "summing up" the items. Read more

impl Sum<Wrapping<i32>> for Wrapping<i32>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by "summing up" the items. Read more

impl Sum<Wrapping<u128>> for Wrapping<u128>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by "summing up" the items. Read more

impl Sum<Wrapping<usize>> for Wrapping<usize>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by "summing up" the items. Read more

impl Sum<Wrapping<u8>> for Wrapping<u8>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by "summing up" the items. Read more

impl Sum<Wrapping<i8>> for Wrapping<i8>
1.14.0
[src]

Method which takes an iterator and generates Self from the elements by "summing up" the items. Read more

impl BitXorAssign<Wrapping<u32>> for Wrapping<u32>
1.8.0
[src]

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<u8>> for Wrapping<u8>
1.22.0
[src]

Performs the ^= operation.

impl BitXorAssign<Wrapping<u64>> for Wrapping<u64>
1.8.0
[src]

Performs the ^= operation.

impl BitXorAssign<Wrapping<u128>> for Wrapping<u128>
1.8.0
[src]

Performs the ^= operation.

impl BitXorAssign<Wrapping<i16>> for Wrapping<i16>
1.8.0
[src]

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<u32>> for Wrapping<u32>
1.22.0
[src]

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<i64>> for Wrapping<i64>
1.22.0
[src]

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<usize>> for Wrapping<usize>
1.22.0
[src]

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<i16>> for Wrapping<i16>
1.22.0
[src]

Performs the ^= operation.

impl BitXorAssign<Wrapping<i32>> for Wrapping<i32>
1.8.0
[src]

Performs the ^= operation.

impl BitXorAssign<Wrapping<i64>> for Wrapping<i64>
1.8.0
[src]

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<u128>> for Wrapping<u128>
1.22.0
[src]

Performs the ^= operation.

impl BitXorAssign<Wrapping<i128>> for Wrapping<i128>
1.8.0
[src]

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<u16>> for Wrapping<u16>
1.22.0
[src]

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<u64>> for Wrapping<u64>
1.22.0
[src]

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<i32>> for Wrapping<i32>
1.22.0
[src]

Performs the ^= operation.

impl BitXorAssign<Wrapping<u16>> for Wrapping<u16>
1.8.0
[src]

Performs the ^= operation.

impl BitXorAssign<Wrapping<usize>> for Wrapping<usize>
1.8.0
[src]

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<isize>> for Wrapping<isize>
1.22.0
[src]

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<i8>> for Wrapping<i8>
1.22.0
[src]

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<i128>> for Wrapping<i128>
1.22.0
[src]

Performs the ^= operation.

impl BitXorAssign<Wrapping<u8>> for Wrapping<u8>
1.8.0
[src]

Performs the ^= operation.

impl BitXorAssign<Wrapping<i8>> for Wrapping<i8>
1.8.0
[src]

Performs the ^= operation.

impl BitXorAssign<Wrapping<isize>> for Wrapping<isize>
1.8.0
[src]

Performs the ^= operation.

impl BitAndAssign<Wrapping<u16>> for Wrapping<u16>
1.8.0
[src]

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<i128>> for Wrapping<i128>
1.22.0
[src]

Performs the &= operation.

impl BitAndAssign<Wrapping<i8>> for Wrapping<i8>
1.8.0
[src]

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<i64>> for Wrapping<i64>
1.22.0
[src]

Performs the &= operation.

impl BitAndAssign<Wrapping<u32>> for Wrapping<u32>
1.8.0
[src]

Performs the &= operation.

impl BitAndAssign<Wrapping<i64>> for Wrapping<i64>
1.8.0
[src]

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<isize>> for Wrapping<isize>
1.22.0
[src]

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<u16>> for Wrapping<u16>
1.22.0
[src]

Performs the &= operation.

impl BitAndAssign<Wrapping<i16>> for Wrapping<i16>
1.8.0
[src]

Performs the &= operation.

impl BitAndAssign<Wrapping<i128>> for Wrapping<i128>
1.8.0
[src]

Performs the &= operation.

impl BitAndAssign<Wrapping<isize>> for Wrapping<isize>
1.8.0
[src]

Performs the &= operation.

impl BitAndAssign<Wrapping<u64>> for Wrapping<u64>
1.8.0
[src]

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<i16>> for Wrapping<i16>
1.22.0
[src]

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<usize>> for Wrapping<usize>
1.22.0
[src]

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<u8>> for Wrapping<u8>
1.22.0
[src]

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<i32>> for Wrapping<i32>
1.22.0
[src]

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<u32>> for Wrapping<u32>
1.22.0
[src]

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<u128>> for Wrapping<u128>
1.22.0
[src]

Performs the &= operation.

impl BitAndAssign<Wrapping<i32>> for Wrapping<i32>
1.8.0
[src]

Performs the &= operation.

impl BitAndAssign<Wrapping<u8>> for Wrapping<u8>
1.8.0
[src]

Performs the &= operation.

impl BitAndAssign<Wrapping<u128>> for Wrapping<u128>
1.8.0
[src]

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<u64>> for Wrapping<u64>
1.22.0
[src]

Performs the &= operation.

impl BitAndAssign<Wrapping<usize>> for Wrapping<usize>
1.8.0
[src]

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<i8>> for Wrapping<i8>
1.22.0
[src]

Performs the &= operation.

impl BitOr<Wrapping<usize>> for Wrapping<usize>
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<u16>> for Wrapping<u16>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a> BitOr<Wrapping<u32>> for &'a Wrapping<u32>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<u128>> for &'b Wrapping<u128>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a> BitOr<Wrapping<u8>> for &'a Wrapping<u8>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<isize>> for Wrapping<isize>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<usize>> for &'b Wrapping<usize>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl BitOr<Wrapping<u16>> for Wrapping<u16>
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<u64>> for &'b Wrapping<u64>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a> BitOr<Wrapping<u128>> for &'a Wrapping<u128>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl BitOr<Wrapping<u128>> for Wrapping<u128>
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<i8>> for Wrapping<i8>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl BitOr<Wrapping<i128>> for Wrapping<i128>
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<u128>> for Wrapping<u128>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a> BitOr<Wrapping<usize>> for &'a Wrapping<usize>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl BitOr<Wrapping<i32>> for Wrapping<i32>
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<i128>> for Wrapping<i128>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a> BitOr<Wrapping<u16>> for &'a Wrapping<u16>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a> BitOr<Wrapping<i16>> for &'a Wrapping<i16>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<i16>> for Wrapping<i16>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a> BitOr<Wrapping<i32>> for &'a Wrapping<i32>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<u8>> for &'b Wrapping<u8>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<i32>> for &'b Wrapping<i32>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<i8>> for &'b Wrapping<i8>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a> BitOr<Wrapping<i128>> for &'a Wrapping<i128>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<i128>> for &'b Wrapping<i128>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<u16>> for &'b Wrapping<u16>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a> BitOr<Wrapping<i8>> for &'a Wrapping<i8>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a> BitOr<Wrapping<isize>> for &'a Wrapping<isize>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl BitOr<Wrapping<isize>> for Wrapping<isize>
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a> BitOr<Wrapping<i64>> for &'a Wrapping<i64>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl BitOr<Wrapping<u64>> for Wrapping<u64>
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl BitOr<Wrapping<u32>> for Wrapping<u32>
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<u64>> for Wrapping<u64>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl BitOr<Wrapping<i64>> for Wrapping<i64>
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a> BitOr<Wrapping<u64>> for &'a Wrapping<u64>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<i32>> for Wrapping<i32>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<isize>> for &'b Wrapping<isize>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl BitOr<Wrapping<i16>> for Wrapping<i16>
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<u32>> for &'b Wrapping<u32>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<u8>> for Wrapping<u8>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<i64>> for &'b Wrapping<i64>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl BitOr<Wrapping<i8>> for Wrapping<i8>
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<usize>> for Wrapping<usize>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<i16>> for &'b Wrapping<i16>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<i64>> for Wrapping<i64>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<u32>> for Wrapping<u32>
1.14.0
[src]

The resulting type after applying the | operator.

Performs the | operation.

impl BitOr<Wrapping<u8>> for Wrapping<u8>
[src]

The resulting type after applying the | operator.

Performs the | operation.

Auto Trait Implementations

impl<T> Send for Wrapping<T> where
    T: Send

impl<T> Sync for Wrapping<T> where
    T: Sync